Naturally, you need to store your pressure washer when it is not in use. When most people think of pressure washers, they assume that placing the machine indoors would be sufficient. However, there is more that goes into storing a pressure washer. This post discusses tips for pressure washer storage.

Preparing your pressure washer for storage

Before looking at the tips for pressure washer storage, there are some preparation tips you have to consider. Preparing the machine for storage will prolong its life by keeping it from getting damaged while in storage. Below are some preparation tips for pressure washer storage;

• Detach the water supply hose
• Shut down the water supply line to preserve water and prevent freezing, especially in winter
• Drain the hose to keep the water from getting frozen or developing mold when in storage
• Detach the trigger gun
• Dain the detergent compartment
• Drain the gas from the tank. The gas tends to crump up in winter and cause obstructions when you use the pressure washer later on.
• Remove the fuel from the washer to keep it from damaging its vital components

Tips for pressure washer storage

Now that you have prepared your machine, you can use the storage tips below;

a. Ensure that all the components are functional

Before storing your pressure washer, the first thing you have to do is inspect its components. It would be wise to ensure that all the components are functional. If there are any damages, ensure to repair or replace them before storing the machine. The last thing you want is to start dealing with damages when you want to take the product out of storage and use it. Some essential components to check are; the pump, nozzle, and all the different attachments.

b. Remove all the attachments and store them properly

Another essential tip is ensuring that all the attachments are out. Once you have removed them, ensure to store them correctly. It would help to watch for smaller attachments to ensure they do not get lost or damaged in storage.

c. Add fuel stabilizer to the engine

After removing the fuel from the tank, replace it with a fuel stabilizer. It will break the gas down and gum up its engine components. You can also take the chance to clean the engine and replace its spark plug.

d. Run clean water in the system

Finally, another tip for pressure washer storage is running clean water in the system. Professionals advise that you do this for about two minutes, especially if you use detergent with the machine. Doing this will relieve the design of pressure. It will also maintain the machine while in storage.

Conclusion

Proper pressure washer storage is as essential as correct usage. It is worth mentioning that proper storage is particularly essential when storing the pressure washer for a long time. The longer the storage time, the more precautions you must take to ensure the product is still functional when you take it out of storage. Additionally, do not store the components in moisture or a place with too much heat. An airconditioned garage should be sufficient.